Hello brianm,
Have you tried to update the driver for the Ethernet? Please use the follow one:
Download it and install it, that should correct the issue.
Do not hesitate to contact us directly if you need further assistance.
Best regards.
↧
Reply To: Access 3 LAN Times outs or goes to sleep or turns off.
↧
Reply To: Azulle Access Plus not turning on and stuck on red
I have the same or similar issue.
Today if failed to turn on. It shows RED and when I press the power button it dosn’t turn on at all. It stay in RED mode.
I hope you will help me
↧
↧
Reply To: Can't connect to any network with Inspire i5-7200U & Ubuntu 18.04
I disabled the indicated option in BIOS, but I’m still having the same issue.
Also, I tried the Mint 19 distribution and I have the exact same issue with both WiFi and Ethernet: Says “connecting” and then says “disconnected”.
I checked the logs on the router and I can see that it is making a DHCP request (I can see the Inspire’s MAC address), and the router responds with an IP address. There is nothing beyond that.
I’m not a Linux wiz so I’m not sure what to check on that end, but I’ve never had a problem like this in the past. Usually it either works completely or not at all.
Any more suggestions?
Thanks
↧
HDMI not recognized
Have a monitor and the HDMI is not being recognized. It’s not cable or monitor, they work with other machines. Downloaded latest version of Intel 500 drivers. Didn’t make a difference. VGA works with monitor but fuzzy. Want hdmi to work.
↧
Reply To: Can't connect to any network with Inspire i5-7200U & Ubuntu 18.04
I FIXED IT.
The problem was the system time .. it was set to the year 2118. When I set it to something remotely close to the real time, both Ethernet and Wi-Fi is working now.
Hopefully this will help someone else someday!
Thanks again for you help.
↧
↧
No sound on HDMI. Pls help!!!
I can not hear any sound on the TV through HDMI.
I already updated all newest driver but I don’t know what’s PCI device
Anyone help me install driver and hear the sound?
Thanks.
↧
Reply To: Installing HDD?
Hello, i am new, my name is Pon, nice to meet you
↧
Reply To: Azulle Access Plus not turning on and stuck on red
Hello Sergey,
Thank you for using the Azulle forums. Please reach out directly to us so we can assist you with your issue. You can contact us at support@azulletech.com, via phone: 786 233 6769. We are available from 9 AM to 5 PM Mon-Fri EST standard.
Best regards
↧
Reply To: Can't connect to any network with Inspire i5-7200U & Ubuntu 18.04
Hello g.threepwood,
Thank you very much for your feedback. We appreciate your contribution, I am sure that it can help future users. Hope that you can enjoy the device to the fullest now.
Best regards
↧
↧
Reply To: No sound on HDMI. Pls help!!!
Hello nvss,
Thank you for using the Azulle forums. Have tried with the follow driver: https://downloadmirror.intel.com/27988/a08/win64_24.20.100.6286.zip
If that doesn’t work, please consider to perform a factory restore, that would give you a fresh start with Windows and most likely correct the isse: https://azulletech.com/topic/factory-restoring-your-azulle-3-device/
Best regads
↧
Reply To: HDMI not recognized
Hello jlieblich,
Welcome to the Azulle forums. Have you tried to perform a factory restore:
https://azulletech.com/topic/factory-restoring-your-azulle-3-device/
That would allow you to determine if is a hardware or a software issue.
Please update us with the result.
Best regards
↧
Change to boot of Micro SD
Can or has anyone booted off of the Micros USB? We reimaged our Azulles but now find they don’t have enough storage for updates. I would like to either move the boot OS to a MicroSD or will have to restore back to the default and hope I don’t run out of space. Thanks
↧
Reply To: How to install Ubuntu in your Plus Device
Hello,
Ubuntu 16.04 installs just fine on the Byte Plus; however, I am having trouble with the sound via HDMI. The only option in the sound settings is two-channel analog over HDMI, is there a driver or setting of some kind to get the digital output working. Or the broader question is how do I get digital audio to my AVR from the byte plus using hdmi or ac3/dts pass thru.
↧
↧
Reply To: Please Help! What Laptop brands are good? Any recommended Laptops?
???
- This reply was modified 13 hours, 16 minutes ago by tommod.
- This reply was modified 13 hours, 15 minutes ago by tommod.
- This reply was modified 13 hours, 14 minutes ago by tommod.
↧
Reply To: How to install Ubuntu in your Plus Device
Hello bababiff,
Welcome to the Azulle forums. I suggest you to try the latest LTS -18.04-. This release comes with a newer version of the kernel that handles the hardware on the Byte Plus better.
Do not hesitate to contact us directly if you need further assistance.
Best regards
↧
Reply To: Change to boot of Micro SD
Hello gwhitcomb,
Thank you for using the Azulle forums. Are you referring to USB or SD cards? Our units don’t support booting from SD cards. Regarding to the Windows Updates no space issue, please check the follow post:
https://azulletech.com/topic/windows-update-no-space-issue/
Let us know if you have further questions or concerns.
Best regards.
↧
Reply To: How to install Ubuntu in your Plus Device
Thanks Luis,
Installed 18.04 but still not working
↧
↧
Reply To: Please Help! What Laptop brands are good? Any recommended Laptops?
Hello tommod,
Thank you for using the Azulle forums. However this is not the best place to discuss about hardware non Azulle related. Your post is out of Topic here, my personal recommendation is to check Youtube videos and Amazon reviews to have a better grasp of the options for Laptops out there.
Best regards
↧
Reply To: How to install Ubuntu in your Plus Device
Hello bababiff,
Thank you for the update. Have you tried with a different TV just to confirm if the behavior is the same? I am also assuming that you are using HDMI since VGA doesn’t pass audio. Also please confirm if you used our ISO:
ftp://ftp.azulletech.com/Recovery/Access%20Plus/ubuntuPlus.iso
Do not hesitate to contact us directly if you need further assistance.
Best regards.
↧
Boot Loop
Hi,
I’ve been experiencing a boot loop issue ever since I went to wipe my Quantum Byte. It is stuck in an infinite boot loop of an intel screen, which then switches momentarily to a Installing Windows screen, then continuously reboots and does the same thing. I cannot access the Bios or anything else. Does anyone know of a fix for this? Or am I better off taking it to a local computer shop to diagnose the problems?
↧